This buttonhole band has been around forever and is still a winner! The method of attaching the band can be applied to any sandwich band – plain, picot, patterned. The chained effect is on the inside of the garment (if you follow my directions) and a sort of back-stitched effect shows on the knit side, just as they would appear if the band had been applied on a linking machine.

The width of the band is up to you, but I recommend always including a technique that will produce a sharp crease on the fold. In this video, I used two turns with the garter bar, but you might do as well with one row on size 10 or a row of picots. If you have a double bed machine, you can knit the band in rib, ending it with some circular rows to sandwich the fabric between.

When applying a band like this to cut-and-sew necklines, you should serge or zigzag the cut neckline edge to make sure nothing drops down and runs later. Also, there should always be some “meat” inside the sandwich. That is, a couple of rows of knitting or, as I did, two stitches from the edge. Otherwise, the band is barely attached to the garment and tends to turn up (or down). I would never attach a band like this to live stitches with no bulk inside the band or it looks flimsy. Take my word for it ….. I know from experience!

When working a neckband with this method, you should be able to join one shoulder seam first and apply the band to the entire neckline. With V-necks, you might need to apply the band in two pieces that overlap the center front.

There is a free Tips and Techniques (Bands That Bind) on my web site that goes into a bit more detail and I recommend that you download it to help you the first few times.

Remember that the beginning and ending buttonholes are usually spaced just a few stitches from either end of the fabric, but that the remaining buttonholes will have larger spaces between them. There are always more spaces to account for than buttonholes. There are several magic formula calculators on line that are very helpful in spacing out the buttonholes.

I have used this method of attaching bands to front, lower and neckline edges and I have also used it to add trim and to finish hand woven fabric. Enjoy!

If you live in the Northeast, try to join us for the spring meeting of the Northeast Machine Knitters’ Guild – we had a great meeting on Saturday at Webs in Northampton, Massachusetts. Check out the Facebook page and follow along:

(PS – I filmed this video at the end of raspberry season when I had some free time – apologies for the arm scratches!)


  1. Leah on October 30, 2017 at 7:57 pm

    Thank you for this video. Your almost make me believe I can do this.

    Please give Arlo a good belly rub from me.

    • Susan Guagliumi on October 30, 2017 at 9:28 pm

      You CAN do it! Just go slowly, step by step. Arlo thanks you – though he already has an abundance of the belly rubbing!

  2. Karen on October 31, 2017 at 9:59 am

    Thank you! Fantastic, easy to follow instructions.

    • Susan Guagliumi on October 31, 2017 at 12:05 pm

      Glad you liked it!

  3. Carla Johnson on November 1, 2017 at 12:54 pm

    Thank you so much for taking the time to demo and explain not only what to do, but also why, and what preventable issues to watch out for.

    • Susan Guagliumi on November 1, 2017 at 6:22 pm

      Happy you found it helpful.

      • Susan Guagliumi on November 14, 2017 at 8:24 pm

        Glad you like it – a girl gotta do what a girl gotta do!