Skip to content

Hand-Manipulated Stitches for Machine Knitters

Knitting Machine Basics

Single Bed Drop Stitch

I did a couple of posts on drop stitch and enlarging stitches back in June of 2017, but I wanted to share this method with you as well because I think is is, simply put, a better approach that requires less fussing with the actual stitches. You can never have too many options to choose…

Read More

Popcorns 101

I’ve had a long “love affair” with popcorns because, for me, that is where the whole concept of bridging began. Once I learned how to make a popcorn with a separate strand of yarn, I was on a quest to eliminate all the ends and strings across the back of the fabric. For the first installment…

Read More

Clean Carriage

Last time I posted a series of photos to show you how I do a deep cleaning on my (Silver Reed) machine beds. This time I thought I would share some photos of how I clean my carriages. I opted not to take the carriage apart because it is a lot trickier than the beds…

Read More

My Clean Machine!

Open Spaces: Exploring Eyelets, Ladders and Slits is done and out for proofing and my SK860 was as dirty as a machine could possibly be. I decided to give it a good cleaning this week – and to take pictures so I could share the info with you. If you click on each picture they…

Read More

Latchtool B/O Around the Needles

I almost titled this blog “LK150 Bind Off” because that is the machine I usually work it on. A few blogs back I showed you a latch tool B/O around the sinker posts (gate pegs), but hobby machines like the LK150 and the European machines (Passap and Superba) do not have sinker posts. They have…

Read More

Latchtool B/O Around the Needles

I almost titled this blog “LK150 Bind Off” because that is the machine I usually work it on. A few blogs back I showed you a latch tool B/O around the sinker posts (gate pegs), but hobby machines like the LK150 and the European machines (Passap and Superba) do not have sinker posts. They have…

Read More

Up-Cycled Claw Weights

Some of the claw weights in my stash date back decades and I have straightened teeth until I felt an Orthodontist! Recently I decided to “remodel” some of the really mangled claws into something useful. As most of you know, I do a lot of hand-manipulated stitches and right now I am nearing the end…

Read More

Stretchy, Usable Latch Tool Cast On!

No matter how hard you try to keep it loose, the latch tool cast on is often too tight to be practical. I came up with a simple solution that enables you to make the edge as loose and stretchy as you want by working around a gauge. In this video, I used a #4…

Read More

Sinker Post/Gate Peg Bind-Offs

When I was in Australia a few years ago, students told me that this is referred to as “the American bind-off”. I’ve always just thought of it as the sinker post bind off! Silver Reed calls them sinker posts – Brother manuals refer to gate pegs. All they are is metal dividers between the needles…

Read More

Stitch Analysis

This guest blog was written by my old friend, Charlene Shafer. Many of you know Charlene from her dozens and dozens of books and patterns and The Knit Knack Shop, which she and her husband, Harold (superb repairman!), have run for about 35 years. They also hold one of THE best seminars in the country…

Read More
Scroll To Top